|
 ANALOGIC Protoboard is used for prototyping analog based designs
using dpASPs from Anadigm. The Protoboard fully integrates an AN221E04
dpASP based system, giving you the power to implement analog functions
in reconfigurable hardware and to update the functions from within
the software.
The board facilitates built-in analog interface block for level-shifting,
amplifying, attenuating, filtering and differential to single-ended
conversion of the signals. The on board microcontroller with boot
kernel gives users the freedom to dynamically reconfigure the dpASP
on board.
| Features: |
- dpASP AN221E04 based configurable
analog design development board.
- Dynamically
reconfigurable through serial port.
- Static reconfiguration
SPI EPROM.
- Compatible to AnadigmDesigner®2
software for downloading of design.
- Analog interface
blocks (7 nos) for level-shifting, amplifying,
attenuating, filtering and differential
to single-ended conversion of the signal.
- High
speed/precision OPAMPs used for signal conversion.
- All
analog interface blocks can be configured
as input or output using jumpers.
- Two dedicate output
interface block, can also be configured as
digital/analog.
- Differential
amplifier (High Bandwidth) for the dedicated
output block.
- Standard PC serial interface for
downloading AnadigmDesigner®2 circuit files.
- Ability
to separate, electrically and physically,
the digital section leaving a purely analog
board with SPI EPROM and digital interface
pins.
- A spare OPAMP powered to 5V that can
be used to buffer analog signals or for
reference voltages.
- Header pins for the entire dpASP
device analog I/Os.
- On-board 16-MHz oscillator
module.
|
| Package includes: |
- Analogic protoboard with
microcontroller boot kernel loaded and tested.
- Printed
user manual of nearly 100 pages.
- SPI serial
EEPROM for static configuration.
- RS-232 Serial
communication cable.
- Short links for Jumpers
for I/O terminations
- EEPROM programmer.
- Audio cable for interfacing
with stereo jack.
- SMPS with +/-5V supply.
|
| You
can use this borad for: |
- Programmable Analog Front-end.
- Adaptive
DSP Dront-end.
- Instrumentation Analog Front-end.
- Adaptive
Filtering and Control.
- Carrier Modulation /Demodulation
(FSK, AM, PSK,ASK).
- Real-time Software Control
of Analog System Peripherals.
- Sensor Signal
Conditioning.
- Ultra-low Frequency Signal Conditioning.
- Custom
Analog Signal Processing.
- Many more…..
|
The products listed in this catalog are provided without warranty
by Anadigm. Anadigm expressly disclaims all warranties,
expressed or implied, with respect to the products supplied
by the listing company, including, but not limited to, implied
warranties of merchantability, fitness for a particular
purpose, title and non-infringement. The listing manufacturers
may offer guarantees or warranties for design performance or
functionality; contact the individual companies for details. |
